The Working Principle Of A CO2 Laser Cutting Machine

Views: 737 Author: Site Editor Publish Time: Origin: Site

Without the use of a hammer and chisel, it is now possible to create intricate forms on a variety of materials using a laser cutting machine.

It has become a major tool in the automobile, woodworking, jewelry, and electronics sectors. If you need a laser cutting machine for metal, wood, or ceramic fabrication, make sure you get the best CO2 laser cutting machine on the market.

After reading this article, you will have a better understanding of what a CO2 laser cutting machine is, how it works, and which laser cutting lens is best for your needs.

What is a CO2 laser cutting machine?

A CO2 laser cutting machine is a machine that cuts materials with a laser beam using motors controlled by a computer.

Notwithstanding, the way that there are a few kinds of laser cutting machines, CO2 laser cutting machines are both flexible and affordable.

The CO2 laser cutting machine is a computer numerical controlled machine that cuts material utilizing a design that has been translated into computer codes.

The CO2 laser cutting machine is equipped for slicing through both aluminum and steel plates.

CO2 laser cutting machine

What is the working principle of a CO2 laser cutting machine?

The CO2 laser tube delivers the laser beam.  This is a glass tube. The glass tube is fixed with a combination of CO2 gas and nitrogen gas.

Inside the tube high voltage power invigorates the gas particles, bringing about an imperceptible light emission power infrared light, otherwise called a laser beam.

At the point when the laser leaves the tube, it is reflected off three opposite mirrors. The principal mirror is close to the laser tube's exit end. It mirrors the beam to a second mirror that is positioned opposite the first.

The beam is reflected in the third mirror, which is opposite to the subsequent mirror and situated on top of the laser head. The third mirror reflects the laser beam down the laser head, past the nozzel's focusing lens, and into the workpiece.

The laser beam can move about in any area in the workpiece thanks to the flexibility of the motor permitting you to cut anything shape you desire.

Selecting the type of lens that fits your application

The lenses used in a CO2 laser cutting machine are categorized based on their focal length. There are lenses available with focal lengths of 1.5 to 4 inches. The lens' tolerance increases with focal length.

 As a result, phototyping engravings are best accomplished with 1.5 and 2-inch focal length lenses.

The 3-inch focal length lens has a larger tolerance and is designed for cutting thick materials, but it can also be used for engravings that aren't phototyped.

The 4-inch focal length lens should be used to cut through the thickest materials.

Purchase your CO2 laser cutting machine from us

Are you seeking a precise and accurate CO2 laser cutting machine? If that's the case, we're pleased to inform you that we manufacture and supply high-quality CO2 laser cutting machines that can handle any project, no matter how complicated.

These laser cutting machines can cut practically any material and require only a little power. Simply click here for additional information about our products.

×

Contact Us

captcha

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.

×
captcha

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.